Products

DESCRIPTION

Basic Info

Model NO.	Maxpro-St
Material	Metals and Plastics
Folded	Unfolded
Whiteboard Type	Short Throw
E-Pen	Primary / Secondary Epen Distinguishable
Performance	Ultra-Strong Anti-Interference
Calibration	Automatic Calibration
Accessories	USB Power Pen
Certificate	Ce FCC RoHS Whql
N. W	0.5kgs
Projector Recommended	Short Throw Projector
Laser Model	Red Laser
Transport Package	110X85X46mm
Specification	24pcs boxes / carton
Trademark	Tallpic
Origin	Nanjing, China
HS Code	84716090
Production Capacity	5, 000PCS/Month

Packaging & Delivery

Package size per unit product 20.00cm * 10.00cm * 5.00cm Gross weight per unit product 0.500kg

Product Description

1.What is Maxpro?

2.Product Description:

1. Plug-and-play, no need to install any software or driver.

2. Laser beam for coverage indication.

3. 4-point calibration.

4. Supports up to 10-point multi-touch.

5. Supports up to 100 inch area.

6. Zero host system resource occupation and works well on low-speed systems

7. Supports Windows/Mac OS/Android/Linux.

8. Suitable for various mounting ways.

9. Wireless connection(optional) and long cable connection(optional)

3.Specifications:

MaxPro
Model	MaxPro-LT	MaxPro-ST	MaxPro-VST
Types	Long focus	Short focus	Very-short focus
Receiving angle	45~60°	60~90°	90~120°
Signal source	940nm infrared
Effective receiving area	120 inch
Communication interface	USB
Calibration method	4-point fast sampling
Multi-touch	10 points
Resolution	2000×1500
Time delay	25ms typical
Power consumption	<0.5W
Installation support	Single laser center indication

Volume	110x85x46mm
Weight	118g
Wireless Dongle
Interface	USB
Wireless communication distance	10m
Power consumption	<0.2W
Volume	67*25*11mm
Infrared pen
Model	P20B
Signal source	940nm infrared
Nib trigger mode	Omni-directional pressure trigger
Lateral sensitivity	< 35g
Dynamic sensitivity	<0.8mm
Power source	Supper capacitor
Charging method	Micro USB
Charging voltage range	4.5V~5.5V
Charging time	≤3 minutes
Rechargeable times	No limit
Full power run time	1 to 2 hours for normal use
Charge retention time	72 hours
Nib trigger life circle	>1 million
Volume	Length 18cm;Diameter 13.5mm
Weight	27g

4.Packing:

Standard version	Wireless version
MaxPro x 1	MaxPro x 1
P20B infrared pen x 1	P20B infrared pen x 1
1.5m USB signal cable x 1	1.5m USB power supply cable x 1
USB charging cable x 1	USB charging cable x 1
Product manual x 1	Product manual x 1
\	Wireless dongle

5.FQA
Q:Do I need to do calibration every time I start the device?
A:For the first time using, calibration is needed. You do not need to do it later if there is no positional movement between the device and the display.
Q:Why is the MaxPro plug-and-play?
A:Unlike other similar products, the MaxPro has processing chips inside. It performs image processing, position calibration and touch handling with Tallpic's efficient algorithm on board. This allows the MaxPro to perform as a standard USB HID multi-touch device.
Q:Why is Tallpic's Plug-and-Play products more smooth and quick?
A:Compared with the normal USB camera based software solutions, Tallpic's pure hardware interative product such as MaxPro/TVT, are free from image transfer delay, image compression/decompression delay and loss,etc.
Q:What operating systems does the MaxPro support? Why my Android system can't work with MaxPro?
A:In principle, any operating system that supports standard USB multi-touch devices can be used with Maxpro. For example, Windows,MaxOS, Linux, Android. But In some Android products, some necessary components/files are removed to simplify the system.This makes it not capable to recognize MaxPro. Usually an Android engineer can easily solve the problem.
Q:My USB cable is not long enough, what can I do?
A:Normally an USB cable can not be more than 5m. If you need longer USB cable, you can choose an USB active repeater cable. Or you can choose the wireless model of MaxPro.
Q:How to choose among the models of MaxPro? A:If you will install it on a projector, MaxPro-VST is suitable for the very-short throw projector, MaxPro-ST is suitable for the short throw projector, MaxPro-LT is suitable for the long focus projector. However, the MaxPro can be installed independently from the projector. Thus MaxPro is not restricted by the projector type.
Q:Why there is a position shift when writing?
A:There are several possible reasons: 1.If the whiteboard is not flat, the position of the convex and concave portion will deviate. 2.The position of the pen was not accurate when doing calibration. 3.The display area is not complete especially when the computer is connected to the projector or LCD through a VGA cable, please check the display.
Q:Can I use the product when there is strong light?
A:This product is for indoor use. If the sunlight directly shines at the screen, it may interfere with the reception of the pen signal. Thus the device can not work.
Q:Why a lot of incorrect touch noise appear when a LiDAR camera or mobile phone with LiDAR is close?
A:Because most LiDAR products emit 940nm laser.It's a strong noise source to our sensor.
Q:What are the advantages of Tallpic's infrared pens?
A:1)Tallpic's infrared pen(P20B,P21SC, etc.) are all-direction pressure sensitive other than axial sensitive. While most other known products are only axial pressure triggered, they are difficult to be triggered in some cases. 2)Most of Tallpic's infrared pen uses super capacitor as electrical energy storage device. Its special advantages are: No battery pollution; No material cost; Unlimited charging life cycle; Fast charging and no worry for the battery's suddenly running out; Light weight and not subject to air transport restrictions.

 

6.Our Service:

Warranty:The signal receiver is guaranteed for three years.Under warranty,if any non-human damage happen, we'll offer free repairing or replacement, including delivery cost.Out of warranty: we offer repairing parts at lower cost, and service free in charge.

 

7.Company Information:

8.Certificates:

CE for TV-Toucher

 

Other certificates

Contact Us:
Address: 3F-B BLD-2, R&D ZONE 1, XUZHUANG SOFTWARE INDUSTRY BASE , XUANWU ROAD 699-8,NANJING CHINA

Website: tallpic.en.made-in-china.com